Vagbremtechnic

Front Brake Kit 6 Piston AP Racing Calipers with 362x32mm 2-Piece Discs (BK0024)

1 review Write a Review
This AP Racing caliper is made from forged aluminium and is a great alternative to the Radical 2 caliper as it will fit under most motorsport derived 18inch whe…
SKU: BK0024
Condition: New
Shipping: Calculated at Checkout
Part: Brake Kit
Position: Front
£2,974.39 (Inc. VAT)
£2,478.66 (Ex. VAT)

Front Brake Kit 6 Piston AP Racing Calipers with 362x32mm 2-Piece Discs (BK0024)

£2,974.39 (Inc. VAT)
£2,478.66 (Ex. VAT)
Choose Options

Front Brake Kit 6 Piston AP Racing Calipers with 362x32mm 2-Piece Discs (BK0024)

£2,974.39 (Inc. VAT)
£2,478.66 (Ex. VAT)

This AP Racing caliper is made from forged aluminium and is a great alternative to the Radical 2 caliper as it will fit under most motorsport derived 18inch wheels. (PLEASE CHECK FITMENT/MEASUREMENTS BEFORE PURCHASING) The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The calipers are offered in black or red with the AP Racing logo but we can offer these calipers in almost any colour with or without almost any logo.

The caliper carriers are made from high strength zinc coated steel. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in a grooved pattern. Matched with our lightweight aluminium bells which are optimized for strength and cooling whilst retaining the benefit of being light weight with a black, hard anodised finish, This brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 bolts coupled with quality spring washers.

Included in our kit:
2x 6 Piston AP Racing calipers
2x Caliper carriers
2x 362x32 2 piece front brake discs (Grooved)
1x Braided front brake lines
4x Caliper to carrier bolts
4x Spring washers for caliper to carrier bolts

1x Set of Ferodo DS2500 brake pads

To complete this front brake kit you will need:
Brake fluid to flush system when installing

Customer reviews

1 Review Write a Reviews
  • Great Upgrade
    5

    Posted by Andy Walkingshaw on 4th Oct 2023

    Superb quality as you'd expect from AP and VAGBremtechnic. Good balance between cost and performance. A full selection of pads is available for this caliper shape. Easy to fit to a Scirocco R but not compatible with roll centre-correcting lower ball joints which had to be replaced by standard ones. A huge weight saving of 5Kg each side versus the standard R brakes. My only minor criticism is the bleed valve caps are hard to remove so will be replaced.

Customers Also Viewed