Vagbremtechnic

Front 2-Piece 362x32mm Disc & Caliper Carrier Kit - Allows Fitment of 4 Piston Aston Martin DB9 or REVERSED Audi TTRS/RS3 Brembo Calipers (DI0018)

0 review Write a Review
Our front 2-piece disc upgrade kit is a much needed addition to the E46 M3. The calipers required for this kit come from Aston Martin or Audi and are made by Br…
SKU: DI0018
Condition: New
Shipping: Calculated at Checkout
Part: Disc Upgrade Kit
Position: Front
£1,424.81 (Inc. VAT)
£1,187.34 (Ex. VAT)

Front 2-Piece 362x32mm Disc & Caliper Carrier Kit - Allows Fitment of 4 Piston Aston Martin DB9 or REVERSED Audi TTRS/RS3 Brembo Calipers (DI0018)

£1,424.81 (Inc. VAT)
£1,187.34 (Ex. VAT)
Choose Options

Front 2-Piece 362x32mm Disc & Caliper Carrier Kit - Allows Fitment of 4 Piston Aston Martin DB9 or REVERSED Audi TTRS/RS3 Brembo Calipers (DI0018)

£1,424.81 (Inc. VAT)
£1,187.34 (Ex. VAT)

Our front 2-piece disc upgrade kit is a much needed addition to the E46 M3. The calipers required for this kit come from Aston Martin or Audi and are made by Brembo. The piston sizes are matched extremely well with only a 1.7% piston area decrease which means the pedal travel will be just like OE. We can offer these calipers in almost any colour and logo combo.

The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers.

The OEM brake pad wear indicator system cannot be used with this brake kit, we recommend leaving the wear sensor plugged in so the warning light doesn't show and to secure the wires safely out of the way.

Installation notes: 
**THIS KIT DOES NOT FIT WITH THE OE 18" WHEELS**

Included in our kit:
2x Caliper carriers
2x 362x32 2 piece front brake discs (Grooved or Drilled)
1x Braided front brake lines
4x Caliper to carrier bolts
4x Spring washers for caliper to carrier bolts

To complete this front brake kit you will need:
2x Aston Martin DB9 or REVERSED Audi TTRS/RS3 4 Piston Brembo Calipers
1x Set of brake pads to suit your driving style
Brake fluid to flush system when installing

Customers Also Viewed