VBT 5mm (with spigot extender specifically for Golf MK4, Polo 6R and Audi A1/S1)/11mm/13mm/16mm Wheel spacers and bolt kits to suit your 5x112/5x100 57.1mm VAG vehicle for a quick and easy solution.
These kits are designed to work with Genuine OE Alloy Wheels and come with a set of VBT wheel Spacers, the correct length Radius wheel bolts to suit and a pair of Spigot extenders for any 5mm spacer options
We highly recommend that you measure your vehicle fully loaded to see what size spacers are required.
if you have a vehicle with 5x100PCD and require spacers for the rear, 16mm only! 5mm/11mm/13mm will not work!
Notes:
- Wheel spacer sizes should be carefully considered
- Wheel bolts included use the standard 17mm Hex, so no need for any special tools
- Designed to work with Genuine OE Alloy Wheels
- May not be compatible with Aftermarket Alloy Wheels (contact us for options)
- Wheel bolts should be tightened to 120nm (88.5lb/ft) and rechecked after 25 miles.
*** Important***
When fitting wheels spacers, it is important that the correct length and type of bolts are used for your specific wheels.
Wheel spacer must always fit flush to the wheel mounting surface. failure to do this can lead to catastrophic failure.
Like any vehicle part, these must be fitted by a qualified technician.
It is the responsibility of the purchaser to ensure the suitability of any spacer for you car and wheels combination.
Vagbremtechnic
Vagbremtechnic
Vagbremtechnic
Vagbremtechnic
Vagbremtechnic
